Using SCS900 software for surface grade checking

SPS985 On any civil construction project where grading is being carried out, it’s important to know the accuracy of the surfaces you’re leaving behind. The technical specs of your grade control system tell you the horizontal and vertical accuracy you can achieve under ideal conditions, but things like machine geometry and hydraulic responses can have an effect on the actual outcome.

With Trimble SCS900 Site Controller Software, you can visualise how well the systems are doing using the “CHECK SURFACE GRADE” function, under the “MEASUREMENTS” main function.SCS-3

This feature allows you to record surface points and compares it against the selected design surface in the selected work order. Here’s what you need to do:

  1. Synchronise your data
  2. Go to SCS Data Manager and view the results of the Work Order with the SCS Report Utility.
  3. Click on the Reports Option and then you can check the box to generate a Surface Grade Check Report. The Report will show you important data like percentage of Points that are either High, In Tolerance, or Low. It also shows you what you had selected in SCS900 as the Tolerance Dead band.
  4. Click on the Plot icon to see a graphical representation of the points you measured which will be colour coded red for high, green for in tolerance and blue for low.SCS-4-300x208
  5. You’ll also get a chart with
    1. Maximum High (Cut)
    2. Average High (Cut)
    3. Maximum Low (Fill)
    4. Average Low (Fill)
    5. Standard Deviation

To read more about SCS900 Site Controller Software, take a look here. If you have any questions about the SCS report utility, contact us today.

Trimble Site Controller Software – measure and set-out

SCS900

Last week we introduced Trimble Site Controller software and gave an overview of what the latest version, 3.4, can do for civil and construction applications.

This week Shaun Gray, Construction Systems Support, is back to show us just how simple the system is to use, with examples from the measure and stake (set-out) mode. If you’re in the field, this means you’ll get through your work faster and with less need for support. If you run a field crew or you’re in operations, this means projects being completed more quickly and accurately with less rework, ultimately costing your company less. When the information gathered out in the field is fed back into Trimble office software the opportunities for making your project more efficient are endless.

Trimble Site Controller Software – Measure mode

With the advanced measurement module in Trimble SCS900 version 3.4, you still have five ‘quick code’ panels with your most used on site features, for example ‘PFHP’ for Fire Hydrant. But now, once your survey becomes more detailed, you can have up to 35 codes displayed, making it much easier to change from one feature to the other.

To show you how this makes everything really simple, here’s how this plays out when carrying out a Digital Terrain Model (DTM) survey focusing on utilities.

1. On the map screen you’ll already notice the five quick codes displayed on the left of the screen.

SCS_Article2_1

2. Select the top left tab where it shows multiple panels and all relevant codes will show up for that group. A group could be roads, utilities, structures etc, in this case it’s utilities. You can also show ‘all codes’.

SCS_Article2_2

 3. To customise the five quick codes – ones that you’ll use all the time – you can drag and drop from the panel of codes shown

4. All you need to do now is select the code and measure

This example of using the advanced measurement module shows just how quick and easy it is to navigate around SCS900 version 3.4. This means you can quickly get on with the field work you’re there to do and get it right first time.

Trimble Site Controller Software – Stake (set-out) mode

Now with a ‘tap and hold’ function available whenever you’re on the map screen, stake mode or set-out mode is also incredibly simple to use. We’ll show you what we mean by using the example of staking out a line:

1. Using the tap and hold function, tap and hold your line (this could be a road or a point). Select whether you want to stake the line or use it as a reference line.

SCS_Article2_3

2. Then select which chainage you want to start at

SCS_Article2_5

3. When the map screen shows up, there are more options you can choose. To the left of the stake tab is the method of stake out, this gives you the option of random or fixed intervals.

4. There are two ways to change the offset settings of the line:

a) Select the Trimble button next to the home button and then go to ‘settings’, ‘line settings’ and changes can be made there.
b) If you configure the info bars along the top to have Stakeout Line Offset H or V, you can then select the tab and it will take you directly to the Stakeout line settings page.

So, as you can see with the examples above, Trimble Site Controller Software – SCS900 version 3.4 – is incredibly simple to use, meaning field crews are more efficient and accurate and can produce better quality data for use in the office.

Trimble Site Controller Software – measure and set-out

SCS900Last week we introduced Trimble Site Controller software and gave an overview of what the latest version, 3.4, can do for civil and construction applications. If you need a refresh, check out the article here. 

This week Johan Johnson, Construction Systems Support, is back to show us just how simple the system is to use, with examples from the measure and stake (set-out) mode. If you’re in the field, this means you’ll get through your work faster and with less need for support. If you run a field crew or you’re in operations, this means projects being completed more quickly and accurately with less rework, ultimately costing your company less. When the information gathered out in the field is fed back into Trimble office software the opportunities for making your project more efficient are endless.

Trimble Site Controller Software – Measure mode

With the advanced measurement module in Trimble SCS900 version 3.4, you still have five ‘quick code’ panels with your most used on site features, for example ‘PFHP’ for Fire Hydrant.  But now, once your survey becomes more detailed, you can have up to 35 codes displayed, making it much easier to change from one feature to the other.

To show you how this makes everything really simple, here’s how this plays out when carrying out a Digital Terrain Model (DTM) survey focusing on utilities.

1. On the map screen you’ll already notice the five quick codes displayed on the left of the screen.

SCS_Article2_1

 

 

 

 

 

 

 

 

2. Select the top left tab where it shows multiple panels and all relevant codes will show up for that group. A group could be roads, utilities, structures etc, in this case it’s utilities. You can also show ‘all codes’.

SCS_Article2_2

3. To customise the five quick codes – ones that you’ll use all the time – you can drag and drop from the panel of codes shown

4. All you need to do now is select the code and measure

This example of using the advanced measurement module shows just how quick and easy it is to navigate around SCS900 version 3.4. This means you can quickly get on with the field work you’re there to do and get it right first time.

Trimble Site Controller Software – Stake (set-out) mode

Now with a ‘tap and hold’ function available whenever you’re on the map screen, stake mode or set-out mode is also incredibly simple to use. We’ll show you what we mean by using the example of staking out a line:

1. Using the tap and hold function, tap and hold your line (this could be a road or a point). Select whether you want to stake the line or use it as a reference line.

SCS_Article2_3

 

 

 

 

 

 

 

 

2. Then select which chainage you want to start at

SCS_Article2_4

3. When the map screen shows up, there are more options you can choose. To the left of the stake tab is the method of stake out, this gives you the option of random or fixed intervals.

4. There are two ways to change the offset settings of the line:

a) Select the Trimble button next to the home button and then go to ‘settings’, ‘line settings’ and changes can be made there.
b) If you configure the info bars along the top to have Stakeout Line Offset H or V, you can then select the tab and it will take you directly to the Stakeout line settings page.

So, as you can see with the examples above, Trimble Site Controller Software – SCS900 version 3.4 – is incredibly simple to use, meaning field crews are more efficient and accurate and can produce better quality data for use in the office.