Enterprise inventory management in your pocket

stockpile-232x300Stockpile inventory management has traditionally relied on semi-annual measurements supplemented by interim rough estimation. What if the frequency and consistency of measurements could be improved to be affordable monthly, weekly, or even daily? That would facilitate true inventory management and control.

What URC Ventures has done through their branded Stockpile Reports service is to address a very pressing business problem.

Read more on page 14 in the current issue of XYHT magazine.

More about NZ’s largest ever earthworks contract

SiteView-story-300x193You might remember back in March, we ran an article about New Zealand’s largest ever earthworks contract, M2PP, won by Fletcher and their subcontractor Goodmans. One of the biggest challenges with the $43 million subcontract was that all payments were calculated on volume, meaning they had to manage and account for these movements in an efficient way.

If you’re interested in learning more about this earthworks contract you can watch Will Newall, Survey Manager of the project discuss their challenges in this 3.50 minute video

M2PP

Around the world with Trimble

AroundtheworldwithTrimble
Going ‘stakeless’ for trim work

Read how US contractor, King’s Construction, completed their first ‘stakeless’ resurfacing project for the Kansas Department of Transport and saved approximately US$89,000 in the Trimble article Contractor Completes First ‘Stakeless’ Resurfacing Project for Kansas DOT using Trimble Technology.

If you are interested in going ‘stakeless’ contact your local SITECH dealer to learn more.

Using SCS900 software for surface grade checking

SPS985 On any civil construction project where grading is being carried out, it’s important to know the accuracy of the surfaces you’re leaving behind. The technical specs of your grade control system tell you the horizontal and vertical accuracy you can achieve under ideal conditions, but things like machine geometry and hydraulic responses can have an effect on the actual outcome.

With Trimble SCS900 Site Controller Software, you can visualise how well the systems are doing using the “CHECK SURFACE GRADE” function, under the “MEASUREMENTS” main function.SCS-3

This feature allows you to record surface points and compares it against the selected design surface in the selected work order. Here’s what you need to do:

  1. Synchronise your data
  2. Go to SCS Data Manager and view the results of the Work Order with the SCS Report Utility.
  3. Click on the Reports Option and then you can check the box to generate a Surface Grade Check Report. The Report will show you important data like percentage of Points that are either High, In Tolerance, or Low. It also shows you what you had selected in SCS900 as the Tolerance Dead band.
  4. Click on the Plot icon to see a graphical representation of the points you measured which will be colour coded red for high, green for in tolerance and blue for low.SCS-4-300x208
  5. You’ll also get a chart with
    1. Maximum High (Cut)
    2. Average High (Cut)
    3. Maximum Low (Fill)
    4. Average Low (Fill)
    5. Standard Deviation

To read more about SCS900 Site Controller Software, take a look here. If you have any questions about the SCS report utility, contact us today.

Sandpiper Dredging helps replenish Sorrento Beach

Popular Sorrento beach had been losing its sand! As summer approached, Sandpiper Dredging utilised hydrographic survey technology to replenish the beach.

Shifting sands in Port Phillip have left the front beach at Victoria’s popular destination of Sorrento beach lacking sand. As summer approached, the Mornington Peninsula Shire and Australian Department of Environment and Primary Industries (DEPI) decided to replenish the beach by dredging a near shore sandbank.

DEPI awarded the contract to Sandpiper Dredging due to their history of minimising environmental impact. Sandpiper has a decade of dredging experience and builds their own precision dredgers in Tweed Heads NSW.

Sandpiper-1-300x169The contract specified the dredge ground extent and the minimum Australian Height Datum (AHD) height Sandpiper could dredge. To achieve the job specifications and efficient operation of their dredge, Sandpiper knew they needed hydrographic survey technology on board. They turned to their local Trimble distributor, SITECH Construction Systems, for advice.

Consultation with SITECH Construction Systems established three key equipment requirements in order to precisely position in 3D the cutter suction head on the dredge frame in real time.

  1. Trimble® SPS461 GPS Heading and Positioning Receiver—a robust and accurate position and heading system all in one integrated GPS receiver designed for easy and fast installation
  2. Inclinometer to measure the angle of the cutter head frame
  3. Trimble HYDROpro™ Dredge software to display and log seabed levels—an easy to use software solution that can be configured for a wide range of dredgers.

Sandpiper-2-300x169

To obtain precise 3D positions from the SPS461 receiver GPS corrections were streamed in, via cellular Internet, from the Victorian Government’s CORS (Continually Operating Reference System).  Position and heading from the SPS461 receiver were interfaced into HYDROpro Construction software to display dredge position. The inclinometer mounted on the dredge frame also interfaced with HYDROpro and allowed the AHD height of the cutter head to be displayed. The dredge position displayed in HYDROpro allowed operators to stay within the dredge grounds and ensure no over dredging occurred. The HYDROpro software was the central hub in the wheel house displaying and logging dredge positions and the AHD height of the dredge head. The easy-to-use HYDROpro software allowed the dredge operator to focus on controlling the dredge rather than understanding where to dredge. Using GPS and AUSGeoid09 removed the need for considering tide data because HYDROpro displayed the AHD height. The logged data could be delivered to the client as an as-built drawing.

Sandpiper-3-300x225

Daniel Fristch,owner of Sandpiper, said “Building our own dredging systems is something we’re really proud of. In building them we can apply our years of experience to ensure we have the right machinery we need to carry out our clients’ work”.

“Working with SITECH Construction Systems is a true partnership because they are as focused on the needs of the customer as we are. After speaking about the challenges we had been facing, SITECH came back with the solution of the Trimble HYDROpro system which meant we could dredge in exactly the right place and maintain coverage, all the while protecting the environment of the beach.”